• electrical
    electrical
  • electronics
    electronics
  • Automotive
    Automotive
  • Communications
    Communications
  • electronics
    electronics

Pre-Moulded Cable Accessories

Pre-Moulded Cable Accessories adopt special designed bus bar to realize quick and easy installation,with compact design to fit  different RMU and cable branch box with various requirements .Complete insulationsealingscreened/unscreened and touchable/untouchable. No special tooling and heating to be needed.After installation the system can be loaded immediately.

35KV Plug-in type termination BH-ICT

BH-ICT 35kV plug-in type termination is applied for the connection to the transformer, switchgear,  switch unit etc. 35kV inner corn plug socket is suitable for the connection to GIS and effective sealing for the SF6. it can be used in door and out door applications without any maintenance. It is mainly composed of inner corn type epoxy insulating bushing and termination which is made of EPDM elastomer to guarantee the reliability for the long term working condition. 

Medium voltage cold applied bushing protection boots(straight type/T type) BH-SB/BH-TB

BH-SB/BH-TB is premolded bellows boots applied for transformer and switchgear connections with the function of protection, insulating and sealing, it can also reduce the clearance between phase to phase, phase and ground as well. Such boots own outstanding behaviors for the weathering resistance and electrical property esp. in the wet conditions. Configuration 35-400mm2 at 7.2V/17.5kV for straight type insulating boots and 46-70mm2 up to 15kV for T type insulating boots.

250A S type screened connector BH-CS

BH-CS 250A S type screened connector, made of EPDM elastomer, is used for indoor application, the main body is composed of inner conductive layer,insulating layer and outer conductive layer, suitable for the connection of XLPE cables 8.7/15kV, 12/20kV to transformers, switchgears and other equipment with premolded separable connector.

T type connector (rear) with surge arrestor BH-YH5WZ

BH-YH5WZ T type connector (rear) with surge arrestor is used for the protection of electric appliance against lighting and overvoltage.

250A/630A Insulating cap BH-IC

 

BH-IC 250A/630A Insulating cap is applied for the insulation protection for the bushings.Suite for 8.7V/15KV,12/20KV.

250A screened elbow connector BH-EC

250A screened elbow connector BH-EC,suitable for the connection of XLPE cables up to 12/20kV to transformers, switchgear, motors and other equipment witha separable connector.

15KV 200A screened elbow connector BH-ECA

BH-ECA 15kV 200A Elbow type connector is applied for the connection to the transformer, RMU, cable branch system with the function of complete insulation,sealing and screened, the suitable range of cable is 35~120mm2.

15KV screened elbow PT connector BH-ECPT

BH-ECPT 15kV Elbow type PT connector is applied for the supply of power/metering control for the electric operation system of transformer EHV tower. with the function of complete insulation, sealing and screened, the suitable range of cable is 35~120mm2.

630A top bus bar hard metal connection system BH-HCS

BH-HCS 630A top bus-bar hard metal connection system is made of EPDM rubber, mainly applied for the top connection of RMU and cable branch system to fit the loaded switch socket with sealing and insulation function

 

630A top bus bar flexible connection system BH-FCS

 BH-FCS 630A top bus bar flexible connection system, Europe style cross connector and J type connector is made of EPDM rubber,mainly applied for the top connection of RMU and cable branch system to fit the loaded switch socket with sealing and insulation function.

 

630A T type separable  screened connector/front BH-CTF

BH-CTF 630A T type separable screened connector, made of EPDM elastomer,is used for indoor application, the main body is composed of inner conductive layer,insulating layer and outer conductive layer, suitable for the connection of XLPE cables8.7/15kV, 12/20kV to medium voltage equipment (transformers, switchgears, motors, etc. ) up to 24KV. 

630A T type separable  screened connector/rear BH-CTR

BH-CTR 630A T type separable screened connector, made of EPDM elastomer,is used for indoor application, the main body is composed of inner conductive layer,insulating layer and outer conductive layer, suitable for the connection of XLPE cables8.7/15kV, 12/20kV to medium voltage equipment (transformers, switchgears, motors, etc. ) up to 24KV. 

Page 1 of 2

Skype Chat

Mr. Frank Chen
Ms. Shelia Lan
Customer Service